Our anemometer is used for measuring the speed of wind, and is also a is derived from the anemes, which means wind, and is used to describe any wind speed instrument used in meteorology. We, Saras Equipments Private Limited, make wired and without wire anemometers. It is used to measur the speed, the velocity and pressure of wind. It is also used to check the quality, the direction, and the rate of flow of wind.

SLI, Safe Load Indicator is the maximum safe load that the lifting equipment can lift, move, suspend, and lower down to the ground without any problem of breaking.

Our load indicator is connected to the hoisting circuit, providing precise load information. The pressure-gauge is located in front of the operator on the right-hand side. The load indicator measures pressures corresponding to the weight of the load using a pressure manometer.

The minimum Safe Working Load (SWL) refers to the mass or force that a piece of lifting equipment can safely use to lift, suspend, or lower a mass without fear of breaking. A Safe Working Load can be 25 - 50% of the >Breaking Strain (BS), but will depend on the usage and the standard required.

Whereas, technically permissible maximum laden mass means the maximum mass allocated to a vehicle on the basis of its construction features and its design performances.

The term load moment is an engineering term which refers to the product of a force and its moment arm. The moment arm is defined as a perpendicular distance between the force vector and a reference point as shown below.

Our crane load moment indicator is a safety device that measures and monitors the weight and angle of a crane's boom. It calculates the load moment on the crane based on the boom angle, length, and weight of the load, providing real-time data and alerts to the crane operator when the crane approaches its load limits.

The LMI reads its load value using a pair of load cells, which read tension, An advantage of an LMI is the weight of the boom is calculated as a part of the load calculation.